Loading the multipurpose feeder
54
Printing
6 Slide the width guides until they lightly rest against the edge of the media.
7 Set the Paper Size and Paper Type for the multipurpose feeder (MP Feeder Size and MP Feeder Type) to the
correct value for the print media you loaded.
a Press on the operator panel.
b Press until Paper Menu appears, and then press .
c Press until Paper Size/Type appears, and then press .
d Press until MP Feeder Size/Type appears, and then press .
e Press until the appears next to the media size you loaded, and then press .
f Press until the media type you loaded appears, and then press .
g Press repeatedly to return to the Ready state.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
