Repair information 4-25
7011-2xx / 3xx
Fuser power cable removal
1. Remove the LVPS/HVPS card. See “LVPS/HVPS card assembly removal” on page 4-29 for more
information.
Note: The cable can be reached without fully removing the card.
2. Remove the rear cover. See “Rear cover removal” on page 4-5 for more information.
3. Remove the exit guide assembly. See “Paper exit guide assembly removal” on page 4-37 for more
information.
4. Remove the two screws (B) from the lower corners of the fuser.
5. Slide the fuser out far enough to expose and disconnect the AC cable connections.
6. Extract the fuser power cable.
To Next Page
Loading...
