EasyManua.ls Logo

Lexmark X3550 - Setting up the Printer for Wireless Printing

Lexmark X3550
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14 Insert the cartridges, and then close the cartridge carrier lids.
15 Close the scanner unit.
16 Press to align the cartridges.
Discard or recycle the alignment page that prints.
If you are setting up the printer without a computer, you are finished. You can now use the printer.
If you are setting up the printer on a Macintosh computer:
To print using a wireless connection, see “Setting up the printer for wireless printing ” on page 15.
To print using a USB cable, see “Setting up the printer using a USB cable” on page 17.
Setting up the printer for wireless printing
The following instructions are for setting up the printer for wireless printing on a Macintosh operating system.
Notes:
Make sure you have completed the initial setup of the printer. For more information, see “Setting up the printer
on a Macintosh operating system or without a computer” on page 11.
If you previously set up the printer with a computer and want to set it up on another computer on your wireless
network, see “Installing the printer on additional network computers” on page 19.
Note:
1 Make sure the computer is on.
2 From the Finder desktop, click the Applications folder.
3 From the Applications folder, double-click the Internet Connect icon.
15

Table of Contents

Other manuals for Lexmark X3550

Related product manuals