Lexmark X3550 - Learning About the Software; Using the Lexmark Imaging Studio

1
2
3
4
5
7
6
Press To
1
• Turn the printer on.
• Turn the printer off.
– Press and then release the button quickly to enter Power Saver mode.
– Press and hold the button for two seconds to turn the printer off.
• Stop the print, copy, or scan process.
2
Copy Mode Access the copy default screen and make copies.
Note: The mode is selected when the button light is on.
3
Scan Mode Access the scan default screen and scan documents.
Note: The mode is selected when the button light is on.
4
Photo Card Access the photo default screen and print photos.
Note: The mode is selected when the button light is on.
5
Settings Access the settings default screen and change printer settings.
Note: Other button lights are off when this button is selected.
6
Lighter / Darker Adjust the brightness of a copy or photo.
7
Display the Copy, Scan, or Photo Card menu, depending on which mode is selected.
27