7 Press .
The following message appears: This will reset all wireless network settings. Are you
sure?
8 Press or repeatedly until Yes appears.
9 Press .
Clearing wireless settings appears.
Notes:
• It may take 30-60 seconds for the settings to be cleared.
• The Wi-Fi indicator light will turn to orange.
Uninstalling and reinstalling the software
If the printer is not functioning properly, or if a communications error message appears when you try to use the
printer, you may need to uninstall and reinstall the printer software.
For Windows users:
1 Disable any anti-virus program.
2 Click Start Programs or All Programs Lexmark 3500-4500 Series.
3 Select Uninstall.
4 Follow the instructions on the computer screen to remove the printer software.
5 Restart the computer before reinstalling the printer software.
6 Insert the CD for Windows, and then follow the instructions on the computer screen to reinstall the software.
Note: If the install screen does not appear automatically after you restart your computer, click Start Run, and
then type D:\setup.exe, where D is the letter of your CD-ROM drive.
For Macintosh users:
1 Close all open software applications.
2 From the Finder desktop, double-click the Lexmark 3500-4500 Series folder.
3 Double-click the Uninstaller icon.
4 Follow the instructions on the computer screen to remove the printer software.
5 Restart the computer before reinstalling the printer software.
6 Insert the CD for Macintosh.
7 From the Finder desktop, double-click the Lexmark 3500-4500 Series Installer icon.
8 Double-click the Install icon.
9 Follow the instructions on the computer screen to reinstall the software.
66
To Next Page
Loading...
