Diagnostic aids 3-7
Lexmark confidential until announce edited 1/4/2007 7100-XXX
Protocol Definition
The two submenu items can be accessed using the and keys to navigate to the individual settings.
When the desired protocol definition setting is displayed, press to select the item.
Training Retries — This is the number of attempts made to receive a fax before switching to a different
compression setting. When Training Retries is selected, use the and keys to navigate to the
desired number of retries, and press to select the new setting. Press to exit.
Encoding — This allows you set the fax compression setting. The options are JBIG, MMR, MR, and MH.
This can also be changed in the user menus. When Encoding is selected, use the and keys to
navigate to the desired encoding, and press to select the new setting. Press to exit.
Protocol Definition Timer — These settings affect the time duration before a protocol used to transmit a
fax is switched. This setting is country or region dependent and should not be changed without supervision
of a second-level support person.
T0 Timer
T1 Timer
T4 Timer
RX Settings
Silence Detection Time
CNG Tone Detection Time
CNG Cycles
Tone Sound Monitoring
Stop / Clear Key - This makes the key functional or non-functional.
To Next Page
Loading...
