Diagnostic aids 3-5
Lexmark confidential until announce edited 1/4/2007 7100-XXX
Counter
The Counter submenu displays various counters maintained by the MFP. These are permanent counts.
While in the Display info menu, use the and keys to navigate to Counter and press the key to
enter the submenu. Counter menu items are accessed by using the and keys to navigate within
the submenu to each item.
Printer Counter - This submenu maintains the base print engine counters. Use the and keys to
navigate to each counter within the submenu. Press to select the displayed item. Press to exit an
item.
1. Total page — Total number of pages printed
2. Total Image — Number of images printed
3. Black Image — Number of black color planes printed
4. Magenta — Number of magenta color planes printed
5. Cyan — Number of cyan color planes printed
6. Yellow —Number of yellow color planes printed
Scanner Counter - This submenu item displays the number of various scans performed by the MFP. Use
the and keys to navigate to each counter within the submenu. Press to select the displayed
item. Press to exit an item.
1. Total Page — Total number of pages scanned
2. Total Image — Total number of images
3. Black Page — Total number of black and white scans
4. Color Page — Total number of color scans
5. ADF Used — Total number of scans from the ADF
Jam Counter - This menu shows the number of jams in various areas of the MFP. Use the and
keys to navigate to each counter within the submenu. Press to select the displayed item. Press to
exit an item.
1. Total — Total number of jams
2. ADF — Total number of ADF jams
3. Prt Output Bin — Total number of jams in the fuser area
4. internal — Total number of jams in the paper path
5. Tray 1 — Total number of paper tray jams.
Press again to exit the Counter menu.
Print Reports
Print Reports is the second top level menu item. From the top level of the Maintenance mode menu, use
the and keys to navigate to Print Reports. Press to select the Print Reports item.
G3 Protocol Dump List - This is the only menu item in the Print Reports submenu. This setting converts
inbound fax data into ASCII data to aid in troubleshooting fax issues. Press to select this item.
Press twice to return to the top level of the Maintenance mode menu.
To Next Page
Loading...
