Repair information 4-13
7100-XXX
7. Rotate the support pin away from the MFP, and slide toward the center of the MFP to remove. Repeat
for the other support pin
8. Remove the front inner cover from the MFP.
Right cover removal
1. Remove the waste toner bottle. See “Waste toner bottle removal” on page 4-7.
2. Remove the top cover assembly. See “Top cover assembly removal” on page 4-10.
3. Remove 2 screws (A) from the bottom of the right cover.
4. Remove the right cover from the MFP. Maneuver the front cover for easy removal.
To Next Page
Loading...
