Lexmark X502N - Cleaning Roller Clutch Removal

Repair information 4-25
7100-XXX
Cleaning roller clutch removal
1. Remove the transfer belt cleaning roller. See “Transfer belt cleaning roller removal” on page 4-4.
2. Remove the right cover. See “Right cover removal” on page 4-13.
3. Using a flat-tipped tool, pry and remove the cleaning roller clutch gear from the inside of the MFP.
4. Disconnect the cleaning roller clutch cable (A).
5. Remove three screws (B) from the cleaning roller clutch.
6. Remove the cleaning roller clutch from the MFP.
B
A