Lexmark X5470 - Setting up a Fax Footer

13 Enter your fax number using the keypad.
Note: You can enter a maximum of 64 numbers.
14 Press to save the setting.
15 Press twice.
16 Press or repeatedly until Tools appears.
17 Press .
18 Press or repeatedly until Device Setup appears.
19 Press .
20 Press or repeatedly until Date/Time appears.
21 Press .
22 Enter the date using the keypad.
23 Press .
24 Enter the time using the keypad.
25 Press .
26 If the hour you entered is 12 or less, press or repeatedly until AM, PM, or 24hr appears.
27 Press to save the setting.
Setting up a fax footer
1 From the control panel, press Fax Mode.
2 Press .
3 Press or repeatedly until Fax Setup appears.
4 Press .
5 Press or repeatedly until Fax Printing appears.
6 Press .
7 Press or repeatedly until Fax Footer appears.
8 Press .
9 Press or repeatedly until On appears.
10 Press .
11 During the initial setup of your printer, you were prompted to enter the date and time. If you have not entered
this information:
a Press twice.
b Press or repeatedly until Tools appears.
c Press .
d Press or repeatedly until Device Setup appears.
Using Fax
35