Lexmark X656DE - Page 126

2-92 Service Manual
7462
Go Back
Previous
Next
923.75 Fuser over
temperature failure.
Fuser type = 2
The fuser hot roll has
exceeded the proper operating
temperature.
Replace the fuser unit
assembly if problem remains.
Go to “Fuser unit assembly
removal” on page 4-16.
923.76 Fuser over
temperature failure.
Fuser type = 2
The fuser hot roll has
exceeded the proper operating
temperature.
Replace the fuser unit
assembly if problem remains.
Go to “Fuser unit assembly
removal” on page 4-16.
924.00 Open fuser thermistor
check
Fuser type = 1
The fuser thermistor might be
faulty.
Replace the fuser unit
assembly if problem remains.
Go to “Fuser unit assembly
removal” on page 4-16.
924.01 Open fuser thermistor
check failure.
Fuser type = 1
The fuser thermistor has failed. Replace the fuser unit
assembly if problem remains.
Go to “Fuser unit assembly
removal” on page 4-16.
924.25 Open fuser thermistor
check
Fuser type = 2
The fuser thermistor might be
faulty.
Replace the fuser unit
assembly if problem remains.
Go to “Fuser unit assembly
removal” on page 4-16.
924.26 Open fuser thermistor
check failure.
Fuser type = 2
The fuser thermistor has failed. Replace the fuser unit
assembly if problem remains.
Go to “Fuser unit assembly
removal” on page 4-16.
924.50 Open fuser thermistor
check
Fuser type = 1
Fuser page count has
exceeded life.
The fuser thermistor might be
faulty.
Replace the fuser unit
assembly if problem remains.
Go to “Fuser unit assembly
removal” on page 4-16.
924.51 Open fuser thermistor
check failure.
Fuser type = 1
Fuser page count has
exceeded life.
The fuser thermistor has failed. Replace the fuser unit
assembly if problem remains.
Go to “Fuser unit assembly
removal” on page 4-16.
924.75 Open fuser thermistor
check
Fuser type = 2
Fuser page count has
exceeded life.
The fuser thermistor might be
faulty.
Replace the fuser unit
assembly if problem remains.
Go to “Fuser unit assembly
removal” on page 4-16.
924.76 Open fuser thermistor
check failure.
Fuser type = 2
Fuser page count has
exceeded life.
The fuser thermistor has failed. Replace the fuser unit
assembly if problem remains.
Go to “Fuser unit assembly
removal” on page 4-16.
Error
code or
message
Error contents Description/Action Possible repair actions