2-142 Service Manual
7526
ADF input sensor service check
Step Questions / actions Yes No
1 1. Turn the printer off.
2. Open the ADF front cover.
Is the flag (A) damaged?
Replace the ADF case
assembly. See “ADF case
assembly removal” on
page 4-239.
Go to step 2.
2
1. Remove the ADF front cover. See “ADF
front cover removal” on page 4-217.
2. Remove the ADF motor side cover. See
“ADF motor side cover removal” on
page 4-221.
3. Close the ADF case assembly.
Are the connector (A) seated correctly?
Replace the ADF case
assembly. See “ADF case
assembly removal” on
page 4-239.
Reseat connectors
To Next Page
Loading...
