Diagnostic aids 3-35
7526
This setting determines how much DRAM memory the MFP will allot to a priority queue. Amounts are 25, 35, 50,
80, or 100MB. The default is 80MB. The regular queue is interrupted for copy jobs in the priority queue.
To change the Min Copy Memory value:
1. Touch Min Copy Memory from the Configuration Menu.
2. Touch the or arrow to change between 25 MB, 35 MB, 50 MB, 80 MB, and 100 MB.
3. Touch Submit.
Submitting changes… is displayed.
You are automatically returned to the Configuration menu.
Format Fax Storage
This procedure formats fax storage. When executed, this operation ONLY deletes faxes that are stored in the
location identified by the value of the Fax Storage Location setting.
1. Touch Format Fax Storage from the Configuration Menu.
2. Touch either Yes or No
• If Yes is selected, Formatting Fax Flash DO NOT POWER OFF is displayed. Then you are automatically
returned to the Configuration main menu.
• If No is selected, you are returned to the Configuration main menu.
To Next Page
Loading...
