Lexmark X748dte - Operator Panel and Menus; Operator Panel; Buttons, Icons, and Light Description

2-2 Service Manual
7526
Go Back
Previous
Next
Operator panel and menus
Operator panel
The operator panel consists of these items:
Buttons, icons, and light description
Use the To
1 Display View printing, e-mailing, copying, and faxing options as well as status and
error messages.
2 Sleep button Enable Sleep Mode or Hibernate Mode.
The following are the statuses of the indicator light and the Sleep button:
• Entering or waking from Sleep Mode—The indicator light is illuminated
solid green, Sleep button is illuminated.
• Operating in Sleep Mode—The indicator light is illuminated solid green,
Sleep button is illuminated solid amber.
• Entering or waking from Hibernate Mode—The indicator light is
illuminated solid green, Sleep button is illuminated blinking amber.
• Operating in Hibernate Mode—The indicator light is un-illuminated, Sleep
button is blinking amber for 1/10 of a second, then go completely un-
illuminated for 1.9 seconds in pulsing pattern.
The following actions wake the printer from Sleep Mode:
• Touching the screen or any hard button presses.
• Opening an input tray, cover, or door.
• Sending a print job from the computer.
• Performing a Power On Reset (POR) with the main power switch.
• Loading paper into the scanner ADF.
• Raising the scanner flatbed cover.
3 Keypad Enter numbers, letters, or symbols.
4 Dial Pause • Cause a two- or three-second dial pause in a fax number. In the Fax To
field, a dial pause is represented by a comma (,).
• Redial a fax number.
Note: This button acts as a redial when it is pressed from the Home screen.
3
1
2
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PQR
8
STU
9
WXYZ
0
9
1
4
5
6
7
8
10
2