4-146 Service Manual
7526
Pick tires removal and replacement
See for the part number.
The autocompensator pick roll tires are located in the base printer. There are also tires in all input options. If you
have additional input options, and you are having problems with media picking, replace these tires also. Always
replace the pick tires in pairs. The tires come in a package of two.
Warning: Remove only the rubber tires and not the pick tire assembly to avoid losing small parts.
1. Remove the paper tray.
2. Pull the paper pick arm (A) down.
3. Remove the pick tire (B) from the pick tire assembly (C). Repeat for the other pick tire (D).
To Next Page
Loading...
