Lexmark X748dte - Page 443

Repair information 4-149
7526
Go Back
Previous
Next
8. Remove all of the toner cartridges.
a. Remove the four screws (D).
b. Lift the rear cover and remove it.
9. Remove the rear frame cover.
a. Loosen the eight screws (E).
b. Lift the rear frame cover, and remove.
10. Remove the right cover. See “Right cover removal” on page 4-38.
11. Remove the left cover with the left door cover attached. See “Left cover removal” on page 4-24.
12. Remove the system board support shield. See “System board support shield removal” on page 4-171.