Lexmark X748dte - Page 516

4-222 Service Manual
7526
Go Back
Previous
Next
5. Lift the ADF motor side cover, and disconnect the tray connector (B).
Note: If you are removing the ADF motor side cover to access another part, leave the cable attached, and you
are done. If you need to replace the ADF motor side cover FRU, continue with the next step to remove the
separate left door cover FRU. Reinstall the cable in the new ADF motor side cover.
6. Gently pull the cable through the hole (C) in the side of the ADF motor side cover.