Lexmark X748dte - Paper Present LED Card Removal

4-266 Service Manual
7526
Go Back
Previous
Next
6. Slide the flatbed scanner forward, and lift it up to remove it.
Warning: Whenever you replace the ADF (entire), the flatbed scanner, or the MDC card, perform the “Scanner
Manual Registration” in Configuration menu.
To enter Config Menu:
1. Turn off the multifunction printer.
2. Press and hold buttons 2 and 6.
3. Turn on the MFP.
4. Release the buttons when the progress bar displays.
Paper present LED card removal
1. Remove the input tray. See “Input tray removal” on page 4-231.
2. Remove the six screws (A) securing the underside of the input tray.