Lexmark X748dte - Scanner MDC Card Removal

4-270 Service Manual
7526
Go Back
Previous
Next
8. Turn the ADF over.
9. Remove the ADF motor side cover. See “ADF motor side cover removal” on page 4-221.
10. Remove the screw (F) and disconnect the scanner ICC cable ground cable (G).
11. Remove the scanner ICC cable.
Scanner MDC card removal
Warning: This part might contain customer confidential information. See “Data Security Notice” on page 4-1
for more details. After removing this part, return it to your next level of support so any data can be
removed. If the customer requests to keep the part, they must sign a confirmation of memory device
retention form.
1. Remove the rear cover. See “Rear cover removal” on page 4-36.
2. Remove the left cover. See “Left cover removal” on page 4-24.