2-142 Service Manual
7562
3
Remove the 5-bin mailbox rear cover. See “5-bin
mailbox rear cover removal” on page 4-327.
Check the cable in the indicated connector.
Is the cable proper connected?
Go to step 4. Reseat the
connector.
4
Replace the 5-bin mailbox pass thru sensor. See“5-bin
mailbox sensor (pass thru) assembly removal” on
page 4-329.
Does the error reoccur?
Replace the 5-
bin mailbox
controller card.
See “5-bin
mailbox
controller card
removal” on
page 4-315.
Problem solved.
Step Questions / actions Yes No
To Next Page
Loading...
