Lexmark X792 7562-4xx - Exit Cooling Duct Removal

4-56 Service Manual
7562
Go Back
Previous
Next
Exit cooling duct removal
See “Rear” on page 7-15 for the part number.
1. Remove the system board cage with board. See “System board cage with board removal” on
page 4-157.
2. Remove the main fan. See “Main fan removal” on page 4-88.
3. Remove one screw (A) and three screws (B).
4. Clip two cable ties and pull enough slack in the cables to remove the duct.
B (88A0323)A (88A0212)