Lexmark X792 7562-4xx - Waste Toner Container Removal; Waste Toner Gears Removal

Repair information 4-163
7562
Go Back
Previous
Next
Waste toner container removal
1. Open the front access door.
2. Open the standard media tray.
3. Flip the green handles forward and pull out the waste toner container.
Waste toner gears removal
See “Rear” on page 7-15 for the part number.
1. Remove the EP drive. See “EP drive assembly removal” on page 4-54.
2. Remove the E-clip (A), and remove the larger gear.
3. Remove the E-clip (B), and remove the smaller gear.
A (1126830)