Lexmark X792 7562-4xx - ADF Feed 1-Way Bearing and Gears Removal; ADF Feed Drive Motor Assembly Removal

4-180 Service Manual
7562
Go Back
Previous
Next
ADF feed 1-way bearing and gears removal
See “ADF feed and drive” on page 7-25 for the part number.
1. Remove the ADF feed drive motor assembly. See “ADF feed drive motor assembly removal” on
page 4-180.
2. Remove the two E-clips (A).
3. Remove the ADF feed 1-way bearing and gears.
ADF feed drive motor assembly removal
See “ADF feed and drive” on page 7-25 for the part number.
1. Remove the ADF transport motor bracket assembly with cable. See “ADF transport drive motor bracket
assembly with cable removal” on page 4-200.
2. Open the clip to release the cables attached to the right side of the assembly.