Lexmark X792 7562-4xx - Scanner Platen Glass Cover Removal

4-234 Service Manual
7562
Go Back
Previous
Next
Scanner platen glass cover removal
See “Flatbed scanner” on page 7-19 for the part number.
1. Remove the ADF unit. See “ADF unit assembly removal” on page 4-203.
2. Remove the scanner left side rear cover. See “Scanner left side rear cover removal” on page 4-214.
3. Remove the scanner left side front cover. See “Scanner left side front cover removal” on page 4-214.
4. Remove the scanner front cover. See “Scanner front cover removal” on page 4-213.
5. Remove six screws (A).
6. Pull back the tab (B) above the scanner interface card, and lift to remove the scanner platen glass cover.