4-278 Service Manual
7562
2000-sheet high-capacity feeder left anti-tip latch assembly removal
See “Optional 2000-sheet high-capacity feeder” on page 7-35 for the part number.
1. Remove the jam clearance top cover. See “2000-sheet high-capacity feeder rear cover removal” on
page 4-304.
1. Remove the rear cover. See “2000-sheet high-capacity feeder rear cover removal” on page 4-304.
2. Remove the left side cover. See “2000-sheet high-capacity feeder left side cover removal” on
page 4-280.
3. Remove the two screws (A) securing the left anti-tip latch assembly to the drawer.
Note: Hold the left anti-tip latch assembly to prevent it from falling off after removing the screws.
To Next Page
Loading...
