Lexmark X792 7562-4xx - Staplesmart Finisher and High-Capacity Output Stacker; Finisher or Stacker Access Door Beacon LED and Beacon Housing Removal

4-332 Service Manual
7562
Go Back
Previous
Next
StapleSmart finisher and High-capacity output stacker
Finisher or stacker access door beacon LED and beacon housing removal
See “Finisher /High-capacity output stacker assembly” on page 7-37 for the part number.
1. Remove the option from the printer.
2. Remove the left access door assembly. See “Finisher or stacker left access door assembly removal”
on page 4-339.
3. Remove the screw (A), and remove the beacon card.