Lexmark X850E - Rear Upper Cover Removal

Repair information 4-15
7500-XXX
Rear upper cover removal
1. Remove the scanner interface cable assembly (A).
2. Remove the ADF interface cable assembly (B).
3. Remove the rear RIP card cover. See “Rear RIP card cover removal” on page 4-13.
4. Remove the controller box side cover. See “Controller box side cover removal” on page 4-18.
5. Remove the rear motor cover. See “Rear motor cover removal” on page 4-11.
6. Remove the four screws securing the rear upper cover (C) to the machine.
A
Rear
B