Repair information 4-31
7500-XXX
4. Turn the media tray assembly upside down, and remove the screw and two hooks securing the actuator
link (B) to the media tray.
5. Release the boss on the media end guide actuator (C) from the hole in the actuator link (B) by moving the
link in the direction of the arrow.
6. Remove the media end guide actuator (C).
7. Turn the media tray assembly right side up, and slide the media tray end guide (D) toward the center of the
media tray assembly to remove.
B
Hook
End guide
C
Front
To Next Page
Loading...
