Lexmark X850E - Sensor (Pre-Feed) Removal

Repair information 4-41
7500-XXX
Sensor (pre-feed) removal
1. Remove the appropriate media feed unit assembly. See “Media feed unit assembly 1 removal” on
page 4-20 or “Media feed unit assembly 2 removal” on page 4-23.
2. Release the hook securing the sensor (pre-feed) (A).
3. Remove the sensor (pre-feed) (A) from the feed unit front guide (B).
4. Disconnect the connector from the sensor (pre-feed) (A).
5. Remove the sensor (pre-feed) (A).
Front
A
B
Hook