Repair information 4-127
7500-XXX
RIP card chassis bracket removal
1. Remove the rear RIP card cover. See “Rear RIP card cover removal” on page 4-13.
2. Disconnect five connections from the RIP card assembly (A).
3. Remove the two screws securing the RIP card chassis bracket (B) to the frame.
4. Slide the RIP card chassis bracket (B) to the left and out of the frame.
Warning: Do not drop the RIP card chassis bracket, or damage will occur.
B
A
Connectors
Connectors
Connector
To Next Page
Loading...
