Lexmark X850E - 2000-Sheet Dual Input (TTM)-Switch (TTM Media Size) Removal

4-242 MFP Service Manual
7500-XXX
2000-sheet dual input (TTM)–switch (TTM media size) removal
Note: This removal procedure may be applied to tray 3 and tray 4.
1. Remove the tray 3 assembly See (“2000-sheet dual input (TTM)–tray 3 assembly removal” on
page 4-217) or tray 4 assembly (“2000-sheet dual input (TTM)–tray 4 assembly removal” on
page 4-216).
2. Disconnect the connector from the switch (TTM media size) (A).
3. Remove one screw securing the switch (TTM media size) (A).
4. Remove the switch (TTM media size) (A).
Rear
Connector
A