67
Settings
Print Settings
Print settings consist of the following menus. Click any of the menus for more information
Finishing Menu
Use these menu items to set the user default settings for all jobs. Printing from an application may override user default
settings.
Contrast Specifies the contrast used for the
FTP job. The default is dependent
on the Content menu item. If the
Content menu item is reset from the
default setting, then the default for
Contrast is reset, also.
0–5 Text default is 5.
The default is 0 for items other than text.
Shadow Detail Adjusts the amount of shadow detail
visible on a copy.
-4 to +4 (0*) -4 preserves the least amount of shadow
detail.
+4 preserves the most shadow detail.
Scan edge to
edge
Specifies if the original document is
scanned edge-to-edge prior to
sending the FTP job.
Off*
On
Finishing Menu PCL Emulation Menu
Quality Menu PDF Menu
Utilities Menu HTML Menu
Setup Menu Image Menu
PostScript Menu
Menu item Purpose Values and descriptions
Duplex Sets duplex (two-sided) printing as
the default for all print jobs.
Off* Prints on one side of the print media.
On Prints on both sides of the print media.
Menu item Purpose Values and descriptions
To Next Page
Loading...
