Lexmark X925 7541-03 series - Reset Separator Roll and Pick Assembly Counter; Reset Fuser Counter; Reset Maintenance Counter

3-10 Service Manual
7541-03x
Go Back
Previous
Next
Reset Separator Roll and Pick Assembly Counter
This menu item is used to reset the ADF Pic Roll and Separator Roll counter for the scanner when a when a
ADF Pick Roll and Separator Roll is installed.
1. Touch the menu item. A "Reset Separator Roll and Pick Assembly Counter" button is displayed.
2. Touch that button to reset the counter.
Reset Fuser Counter
This menu item is used to reset the fuser counter for the print engine when a Fuser is installed.
1. Touch the menu item. A “Reset Fuser Counter” button is displayed.
2. Touch that button to reset the counter.
Reset Maintenance Counter
This menu item is used to reset the maintenance counter for the print engine when a Paper Feed Maintenance
Kit is installed.
1. Touch the menu item. A “Reset Maintenance Counter” button is displayed.
2. Touch that button to reset the counter.
Auto Align Adj See “Auto Align Adj” on page 3-13
Color Alignment See “Color Alignment” on page 3-14
ADF Edge Erase See “ADF Edge Erase” on page 3-14.
FB Edge Erase See “FB Edge Erase” on page 3-14.
Scanner Manual Registration See “Scanner Manual Registration” on page 3-14.
Disable Scanner See “Disable Scanner” on page 3-14.
Paper Prompts See “Paper Prompts” on page 3-14
Envelope Prompts See “Envelope Prompts” on page 3-14
Action for Prompts See “Action for Prompts” on page 3-15
Jobs On Disk See “Jobs On Disk” on page 3-15
Disk Encryption See “Disk Encryption” on page 3-15
Erase all information on Disks See “Erase all information on Disks” on page 3-15
Wipe All Settings See “Wipe All Settings” on page 3-15.
Font Sharpening See “Font Sharpening” on page 3-15
Require Standby See “Require Standby” on page 3-15
UI Automation
Key Repeat Initial Delay See “Key Repeat Initial Delay” on page 3-16
Key Repeat Rate See “Key Repeat Rate” on page 3-16
Clear Custom Status See “Clear Custom Status” on page 3-16
USB Speed See “USB Speed” on page 3-17
USB PnP See “USB PnP” on page 3-17.
Automatically Display Error Screens See “Automatically Display Error Screens” on page 3-17.
Exit Config Menu See “Exit Config Menu” on page 3-17.
Configuration Menu