Lexmark X925 7541-03 series - Performance; Processor; Memory; Paper Specifications

1-6 Service Manual
7541-03x
Go Back
Previous
Next
Performance
The X925 printers support up to 30 ppm (Letter) and 30 ppm (A4) maximum print speeds.
Actual performance depends on:
• Interface to host (parallel, serial, USB or network)
• Host system and application
• Complexity and content of the page
• Certain options added to or selected with the MFP
• Available memory in the MFP
• Media size, media type and tray source
• Print Resolution
Note: The following special cases that may impact print speeds:
Vinyl Label – Vinyl Label is a customer selectable media type. When Vinyl Label is selected, print speed is
35ppm.
Note: When using custom size media, it is critical that the user define the actual width via the Paper Menu –
Universal Setup on the op panel for best reliability.
Processor
1 GHZ IBM Power PC processor
Memory
Standard memory - 512 mb
Optional memory - 256, 512, and 1024 MB. 1 200 pin x 64 DDR 2 SO-DIMMs. 1 slot.
Optional flash - 256 mb
Paper specifications
Paper sizes supported by the printer
Paper size Dimensions Tray 1 Tray 2
Optional
550-sheet
tray
Multipurpose
feeder
Duplex unit
A3 297 x 420 mm
(11.7 in x 16.6in)
A4 210 x 297 mm
(8.3 x 11.7 in.)
A5 148 x 210 mm
(5.8 x 8.3in.)
A6 105 x 148 mm
(4.1 x 5.8 in.)
B4
B5
1
182 x 257 mm
(7.2 x 10.1 in.)
Letter 216 x 279 mm
(8.5 x 11 in.)
Legal 216 x 356 mm
(8.5 x14 in.)