Lexmark X925 7541-03 series - Rear EMI Shield - Not a FRU

4-106 Service Manual
7541-03x
Go Back
Previous
Next
4. Depress the tabs holding the sensor in place.
Rear EMI shield – Not a FRU
1. Remove the rear cover. See “Rear cover” on page 4-7.
2. Remove the RIP cage. See “RIP cage removal” on page 4-95.
3. Remove the cross bar. See “Crossbar removal (not a FRU)” on page 4-74.
4. Remove the two silver screws (A) securing the top rear of the EMI shield to the frame.