Lexmark X925 7541-03 series - ADF Clutch; ADF Hinge

Repair information 4-137
7541-03x
Go Back
Previous
Next
ADF clutch
1. Remove the ADF main feed unit. See “ADF main feeder” on page 4-134.
2. Remove the clip (A) securing the ADF clutch to the transport roll shaft.
3. Slide the clutch off the shaft.
ADF hinge
1. Remove the ADF unit from the scanner assembly.
2. Place the ADF unit upside down on a non-marring surface.
3. Remove the four screws (A) the secure the hinge to bottom of the flatbed cover.