Lexmark X925 7541-03 series - Paper Feed Clutch Removal

Repair information 4-209
7541-03x
Go Back
Previous
Next
Paper feed clutch removal
1. Remove the screw (A) securing the right front cover.
2. Remove the screw (B) securing the right rear cover.
3. Remove the screw (C) securing the right rear switch cover.
4. Remove the two screws (D) securing the vertical transport guide rail.
5. Remove the vertical transport cover.
6. Remove the two screws (E) securing the right middle cover.
7. Remove the screw (F) securing the vertical transport guide plate.
F