Index I-3
1234xxx
recommended types
1-9
unacceptable 1-10
memory 1-6
menus 3-6
messages, attendance 2-70
Min Copy Memory 3-13
Model Name 3-25
models 1-1
Modem removal 4-94
MPF clutch removal 4-175
MPF pad removal 4-193
N
network card option service check 2-95
networking service check 2-88
No dial tone 2-87
NumPad Job Assist 3-13
O
Op panel paper exit guide removal 4-32
operator panel
description
3-1
indicator light 3-1, 3-2, 3-3, 3-4
operator panel service check 2-91
option card service check 2-90, 2-94
Option controller board removal 4-206
Option door inter lock switch removal 4-208
options and features
description
1-3
Output bin full sensor actuator removal 4-26
P
Panel Menus 3-12
Panel Test 3-21
paper 1-6
recommended types 1-9
unacceptable 1-10
paper and media
paper checks
2-2
Paper empty sensor removal 4-205
paper exit guide removal 4-33
paper exit sensor removal 4-37
Paper feed clutch removal 4-209
Paper feed motor removal 4-110
Paper feed roll removal 4-202
paper feed unit removal 4-68
Paper full sensor removal 4-205
Paper has entered the duplex unit (Paper jam 230, 231-9)
2-26
Paper has entered the fuser and exited the printer (Paper
jam 203)
2-25
Paper has exited the registration roller and entered the
fuser (Paper jam 201)
2-25
Paper has stopped at the registration roller or has not
reached the fuser (Paper jams 200, 250, 24x)
2-25
Paper in ADF size service check 2-100
Paper is being picked up and carried to the registration
roller (Paper jams 200, 250, 24x).
2-24
paper jam
200
2-18
201 2-18
203 2-19
230 2-20
231-39 2-21
24x 2-22
250 2-23
Clearing and troubleshooting paper jams 2-18
Paper level sensor removal 4-204
Paper path service checks 2-24
Paper Prompts 3-14
paper size sensor removal 4-42
Paper size switch removal 4-105
Paper size switches removal 4-203
paper skew service check 2-93
Paper specifications 1-6
paper specifications
media types
1-7
media weights 1-8
paper sizes supported 1-6
Paperfeed roll removal 4-188
Paperfeed unit clutch removal 4-184
Papertray lift motor removal 4-94
Par 1 Strobe Adj 3-26
parts catalog
covers
7-2
performance 1-6
photoconductor lock removal 4-43
Pick roll removal 4-188, 4-202
POR sequence 2-3
Power supply (Dead machine) service check 2-96
Power supply fan removal 4-55
power-on sequence (POR) 2-3
PPDS Emulation 3-12
print quality
print quality test pages
3-21
Print Quality Pages 3-11
PRINT TESTS
Print Quality Pgs
3-21
Quick Test Page 3-20
Printhead controller board / engine board replacement 4-2
printhead controller board removal 4-37
Printhead service check 2-97
processor 1-6
Q
Quick Disk Test 3-23
Quick Test Page 3-20
R
Rear EMI shield – Not a FRU removal 4-106
Rear fan removal 4-102
Registration roll removal 4-190
Registration sensor (MPF tray) removal 4-185
Registration sensor actuator removal 4-185
removal
bin full sensor removal
4-36
cassette stopper removal 4-44
density sensor removal 4-57
Door interlock switch removal 4-89
Duplex removal 4-63
To Next Page
Loading...
