Lexmark X925 - Page 83

2 Make sure to release the width guide lock at the rear of the tray. Squeeze and then slide the width guide to the
correct position for the paper size you are loading.
2
3
1
Note: Always use the width guide lock at the rear of the tray to prevent the margins from being knocked out of
adjustment.
3 Squeeze and then slide the length guide to the correct position for the paper size you are loading.
4 Flex the sheets back and forth to loosen them. Do not fold or crease the paper. Straighten the edges on a level
surface.
5 Load the paper stack with the recommended print side faceup.
Loading paper and specialty media 83