203 paper jam
1 Grasp any jammed paper visible in the standard exit bin, and then
gently pull it out.
Notes:
• Make sure all paper fragments are removed.
• If the page is in the fuser, then the fuser nip release lever
should be lowered and should be switched to envelope
mode.
• After removing the jammed page, return the lever to the
proper position.
2 Touch Continue, jam cleared.
230 paper jam
1 Open the side door.
2 Hold onto the handles of the duplexing unit, open the cover, and
then remove any jammed paper.
CAUTION—HOT SURFACE: The inside of the printer might
be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching.
3 Close the cover on the duplexing unit.
4 Close the side door.
5 Touch Continue, jam cleared.
231–239 paper jams
1 Open the side door.
2 Hold onto the handles of the duplexing unit, open the cover, and
then remove any jammed paper.
CAUTION—HOT SURFACE: The inside of the printer might
be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching.
3 Close the cover of the duplexing unit.
4 Close the side door.
5 Touch Continue, jam cleared.
15
To Next Page
Loading...
