PostScript
4-81
PSSmartSwitch Boolean Supported values are:
True PS SmartSwitch is set to On.
False PS SmartSwitch is set to Off.
For more information, see “Using SmartSwitch” on page 4-1.
TokenTalkType string Setting this variable does not affect the value of other physical internal print servers.
Note: The statusdict string appletalktype is correct for the current job port.
Type name (Read-only) Always returns the value of /Communications.
Zone string Returns the value identified when the printer makes connection to the network at power
on.
Device Parameters for the Communication Device %AppSocket%, %AppSocketA%, %AppSocketB%,
%AppSocketC%, %AppSocketD%
(%AppSocket_NV% and %AppSocket_Pending% contain the same parameters)
DelayedOutputClose Boolean Selects how the printer manages the port at the end of each print job. Supported values
are:
True An end-of-file message is not sent until the current job and all preceding jobs
finish printing.
False An end-of-file message is sent as soon as a job finishes executing in the
interpreter, whether or not that job has finished printing.
This value is set independently for each port.
Enabled Boolean (Read-only)
Supported values are:
Tr ue
False
Filtering name Indicates if the input needs further filtering before the data can be correctly processed.
Supported values are:
InterpreterBased
None
HasNames Boolean (Read-only) Always returns False.
Interpreter name (Read-only)
Supported values are:
PostScript
AutoSelect
PCL
PPDS
On Boolean Designates if the communication channel is On and able to receive and send data.
Supported values are:
True Data is sent and processed.
False Data is lost.
Table 4-11: PostScript Emulation Device Parameters (Continued)
Key Type Definition
To Next Page
Loading...
