Specifications
7-2
Electrical Specifications
Warning: Lexmark recommends that you do not use voltage converters with printers.
Power Requirements
The following tables list the nominal average power requirements (including fuser
power).
Table 7-2: Printer Electrical Specifications
Printer Model Electrical Specification
C935 low voltage models
1
110–127 volts (V) at 47–63 hertz (Hz), nominal
99–137 V, extreme
C935 high voltage models 220
–240 V at 50–60 Hz, nominal
198–254 V, extreme
X940e and X945e low voltage models 100
–127 V at 50–60 Hz, nominal
90–135 V, extreme
X940e and X945e high voltage models 220
–240 V at 50–60 Hz, nominal (not available in all
countries)
198–254 V, extreme
1
Using 220-110 power converter with 110 V printer is not recommended.
Table 7-3: Lexmark C935 nominal average power requirements
Printing states C935
Average power while printing (one-sided)
Base printer
All options
700 W
700 W
Average power while idle
Power Saver on
Power Saver off
13 W
150 W
Max current while printing
100 V
110 V
220 V
16.7 Amps
12.5 Amps
6.3 Amps
To Next Page
Loading...
