Repair information 4-167
7510
2000-sheet dual input (TTM)— tray module left cover removal
1. Remove the four screws securing the tray module left cover (A).
2. Remove the tray module left cover (A).
2000-sheet dual input (TTM)—rear cover removal
1. Remove the four screws securing the rear cover (A).
2. Remove the rear cover (A).
2000-sheet dual input (TTM)—caster removal
1. Remove the media tray 2.
2. Remove the tray module left cover. See “2000-sheet dual input (TTM)– tray module left cover removal” on
page 4-167.
3. Remove TTM media tray 3 assembly. See “2000-sheet dual input (TTM)–TTM media tray 3 assembly
removal” on page 4-171.
4. Remove media tray 4 assembly. See “2000-sheet dual input (TTM)–TTM media tray 4 assembly removal”
on page 4-170.
5. Place the right side of the drawer down.
6. Remove three screws securing the caster (A).
To Next Page
Loading...
