Lexmark X945e MFP 7510 series User Manual

Diagnostic information 2-13
7510
Go Back
Previous
Next
To enter the diagnostic menu:
1. Turn off the printer.
2. Press and hold the 3 and 6 buttons simultaneously.
3. Turn on the printer.
4. Release the buttons after 10 seconds.
Error code table
Error code or
message
Error contents Description/Action
Scanner jam
Sensor (ADF registration) lag
jam
The media reached the sensor (ADF registration)
but did not clear it within the specified time.
Go to “290.13 Sensor (ADF registration) lag jam”
on page 2-78.
200.00
Paper jam
Sensor (registration) late jam The media is late reaching the sensor (registration)
within the specified time after being fed from any
given media tray.
Go to “200.00 Sensor (registration) late jam” on
page 2-39.
200.01
Paper jam
Sensor (registration) lag jam The media reached the sensor (registration) but did
not clear it within the specified time.
Go to “200.01 Sensor (registration) lag jam” on
page 2-40.
200.02
Paper jam
Sensor static jam Media remains in the areas shown on the operator
panel after power on.
Go to “200.02 Sensor static jam” on page 2-42.
200.03
Paper jam
Sensor (media on belt) late
jam
The media is late reaching the sensor (media on
belt) within the specified time after reaching the
sensor (registration).
Go to “200.03 Sensor (media on belt) late jam”
on page 2-43.
201.00
Paper jam
Sensor (fuser exit) late jam The media is late reaching the sensor (fuser exit)
within the specified time after reaching the sensor
(registration).
Go to “201.00 Sensor (fuser exit) late jam” on
page 2-44.
202.00
Paper jam
Sensor (fuser exit) lag jam The media reached the sensor (fuser exit) but did
not clear it within the specified time.
Go to “202.00 Sensor (fuser exit) lag jam” on
page 2-46.
230.00
Paper jam
Sensor (duplex wait) late jam
(duplex media feed)
The media is late reaching the sensor (duplex wait)
within the specified time after the duplex media
inverter clutch is turned on.
Go to “230.00 Sensor (duplex wait) late jam
(duplex media feed)” on page 2-47.
231.00
Paper jam
Sensor (registration) late jam
(duplex media feed)
The media is late reaching the sensor (registration)
within the specified time after the duplex drive motor
is turned on.
Go to “231.01 Sensor (registration) late jam
(duplex media feed)” on page 2-51.

Lexmark X945e MFP 7510 series Specifications

General

Brand	Lexmark
Model	X945e MFP 7510 series
Category	Printer
Language	English