Lexmark X945e MFP 7510 series User Manual

2-36 Service Manual
7510
Go Back
Previous
Next
991.02
Service finisher
error
Sensor (booklet rear tamper
HP) late error
The sensing area of the sensor (booklet rear tamper
HP) is not interrupted within the specified time after
the rear booklet tamper starts moving to the home
position.
Refer to the Finisher Service Manual.
991.03
Service finisher
error
Sensor (booklet rear tamper
HP) lag error
The sensing area of the sensor (booklet rear tamper
HP) remains interrupted within the specified time
after the rear booklet tamper starts moving from the
home position.
Refer to the Finisher Service Manual.
991.04
Service finisher
error
Sensor (booklet end guide
HP) late error
The sensing area of the sensor (booklet end guide
HP) is not interrupted within the specified time after
the booklet end guide starts moving to the home
position.
Refer to the Finisher Service Manual.
991.05
Service finisher
error
Sensor (booklet end guide
HP) lag error
The sensing area of the sensor (booklet end guide
HP) remains interrupted within the specified time
after the booklet end guide starts moving from the
home position.
Refer to the Finisher Service Manual.
991.06
Service finisher
error
Sensor (booklet unit interlock)
error
The sensor (booklet unit interlock) detected that the
booklet maker was not completely inserted when
the finisher front door assembly was closed.
Refer to the Finisher Service Manual.
991.07
Service finisher
error
Sensor (booklet compiler no
media) no media detected
The sensing area of the sensor (booklet compiler no
media) did not detect any media when the booklet
stapler motor was activated.
Refer to the Finisher Service Manual.
991.08
Service finisher
error
Sensor (booklet knife HP)
late error
The sensing area of the sensor (booklet knife HP) is
not interrupted within the specified time after the
booklet knife started moving to home position.
Refer to the Finisher Service Manual.
991.09
Service finisher
error
Sensor (booklet knife HP) lag
error
The sensing area of the sensor (booklet knife HP)
remains interrupted within the specified time after
the booklet knife started moving from home position.
Refer to the Finisher Service Manual.
991.10
Service finisher
error
Sensor (booklet knife folding)
late error
The sensing area of the sensor (booklet knife
folding) is not interrupted within the specified time
after the booklet knife solenoid was activated.
Refer to the Finisher Service Manual.
991.11
Service finisher
error
Booklet stapler error The booklet stapler unit has failed.
Refer to the Finisher Service Manual.
991.12
Service finisher
error
Communication error with
booklet controller card
assembly
A communication error has occurred with the
booklet controller card assembly and the finisher
controller card assembly.
Refer to the Finisher Service Manual.
Error code or
message
Error contents Description/Action

Lexmark X945e MFP 7510 series Specifications

General

Brand	Lexmark
Model	X945e MFP 7510 series
Category	Printer
Language	English