Lexmark X945e MFP 7510 series - 2000-Sheet Dual Input (TTM)- Tray Module Left Cover Removal; 2000-Sheet Dual Input (TTM)-Rear Cover Removal; 2000-Sheet Dual Input (TTM)-Caster Removal

4-174 Service Manual
7510
Go Back
Previous
Next
2000-sheet dual input (TTM)— tray module left cover removal
1. Remove the four screws securing the tray module left cover (A).
2. Remove the tray module left cover (A).
2000-sheet dual input (TTM)—rear cover removal
1. Remove the four screws securing the rear cover (A).
2. Remove the rear cover (A).
2000-sheet dual input (TTM)—caster removal
1. Remove the media tray 2.
2. Remove the tray module left cover. See “2000-sheet dual input (TTM)— tray module left cover removal”
on page 4-174.
3. Remove TTM media tray 3 assembly. See “2000-sheet dual input (TTM)—TTM media tray 3 assembly
removal” on page 4-178.
4. Remove media tray 4 assembly. See “2000-sheet dual input (TTM)—TTM media tray 4 assembly
removal” on page 4-177.
5. Place the right side of the drawer down.
6. Remove three screws securing the caster (A).
A