Lexmark X95 series - ADF Rear Cover Removal; ADF Registration Motor Removal

4-218 Service Manual
7558-xxx
Go Back
Previous
Next
ADF rear cover removal
1. Lift the ADF document tray to its uppermost position.
2. Remove the two screws (A) securing the ADF rear cover to the machine.
3. Remove the ADF rear cover.
ADF registration motor removal
1. Remove the ADF main drive sub-assembly. See “ADF main drive sub assembly removal” on
page 4-215.
2. Remove the tension spring.
3. Remove the two screws (A) securing the ADF registration motor to the assembly.