Lexmark X95 series - Upper Media bin Front Cover Removal; Upper Media Exit Pinch Roll Assembly Removal

Repair information 4-423
7558-xxx
Go Back
Previous
Next
3. Remove the upper media bin assembly (A).
Upper media bin front cover removal
1. Remove the finisher front door assembly. See “Finisher front door assembly removal” on page 4-348.
2. Remove the upper media bin assembly. See “Upper media bin assembly removal” on page 4-422.
3. Remove the two screws securing the upper media bin front cover (A).
4. Remove the upper media bin front cover (A).
Upper media exit pinch roll assembly removal
1. Open the finisher front door assembly.
2. Remove the rear upper cover. See “Rear upper cover removal” on page 4-380.
3. Remove the upper media bin assembly. See “Upper media bin assembly removal” on page 4-422.
4. Remove the top cover. See “Top cover removal” on page 4-421.
A