3
Insert the tray.
Paper jam in door A
Paper jam in the fuser
1
Open doors A and B.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching
it.
Warning—Potential Damage: To prevent damage from
electrostatic discharge, touch any exposed metal frame of
the printer before accessing or touching interior areas of the
printer.
2
Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
3
Open the fuser access door, and then remove the jammed
paper.
Note: Make sure that all paper fragments are removed.
7
To Next Page
Loading...
