Print quality problems
Characters have jagged or uneven edges
Action Yes No
Step 1
a Print a font sample list to check if the fonts you are using are supported
by the printer.
1 From the printer control panel, navigate to:
> Reports > Print Fonts
2 Touch PCL Fonts or PostScript Fonts.
b Use a font that is supported by the printer or install the font that you
want to use. For more information, contact your system support
person.
c Resend the print job.
Do prints still contain characters that have jagged or uneven edges?
Go to step 2. The problem is solved.
Step 2
a Use a font that is supported by the printer or install the font that you
want to use on your computer. For more information, contact your
system support person.
b Resend the print job.
Do prints still contain characters that have jagged or uneven edges?
Contact
customer
support.
The problem is solved.
Troubleshooting 251
To Next Page
Loading...
